Slate Roof Installation in DFW: Who Installs Slate Roofs

In short
Few DFW roofers install slate, so check experience job by job. Verde Roofing, a locally owned Plano roofer, lists slate among the roofs it replaces on homes built for the weight. Owner Chris Grimes inspects the roof with you, photographs what he finds and gives a free written estimate; call or text (214) 687-1951. Verde is an NTRCA Accredited Member. Ask any roofer, Verde included, for photos and addresses of slate roofs they have installed.
Key takeaways
- Natural slate is split stone that Fixr's cost guide puts at 1,000 to 2,000 pounds per roofing square, so structure comes before material selection.
- The National Park Service's slate guidance calls for non-ferrous nails such as solid copper or stainless steel and at least 16-ounce copper for flashings.
- Synthetic slate is a lighter manufactured product with a shorter published life; make sure every quote says which one it is pricing.
- The National Park Service notes that when 20% or more of the slates on a roof or slope are broken, missing or sliding, replacement usually costs less than piecemeal repair.
- Slate skill is specific: ask for slate job photos, addresses and the names of the people who will actually lay the roof.
Slate is the roof people ask about when they have decided this is the last roof they want to buy. It is stone. Laid well, it can outlast the people who chose it. It is also rare in North Texas, which makes the hiring question harder than it is for shingles: most roofers here have never laid one.
If you are planning a slate roof in Dallas–Fort Worth, whether new slate on a custom home or replacement of an aging slate roof, the material is the easy part. Finding people who know how to hang it is the work. Here is how to go about it.
Who installs slate roofs in DFW?
A small share of the region's roofers. Asphalt shingles dominate North Texas, so the typical crew's skills are built around them. Slate installers tend to be found three ways: roofing companies that list slate among the systems they replace, specialty slate and sheet-metal crews that travel for projects, and referrals from architects, builders and slate suppliers who know who has actually done the work locally.
Verde Roofing is in the first group. It is a locally owned roofer based in Plano, and its roof replacement service lists slate, along with tile, among the roofs it replaces on higher-end homes built for the weight. That is the extent of what Verde publishes about slate, so treat it the way you should treat every roofer on your list: ask about specific slate projects and ask to see them.
No guide can rank slate installers for you. What you can do is make each candidate prove the same things, which is what the vetting section below is for.
Where are slate roofs found in North Texas?
Not in many places. When you do see slate in DFW, it tends to be on older, architect-designed homes in established Dallas neighborhoods such as the Park Cities, Preston Hollow and Lakewood, on churches and school or civic buildings, and on a scattering of newer custom homes across the region. Production subdivisions are almost never framed for it.
That pattern tells you two things. First, a house that already carries slate was probably built for it, and replacing slate with slate is a different project from converting a shingle house. Second, on older homes the slate may still be sound while the metal around it has worn out, which changes what you need to buy. If your home is in one of those neighborhoods, our guide to roof replacement in Preston Hollow covers the wider questions older Dallas houses raise.
Are you being quoted natural slate or synthetic slate?
Estimates sometimes say only "slate." Those two words can describe very different roofs.
| Natural slate | Synthetic (simulated) slate | |
|---|---|---|
| What it is | Quarried stone, split and trimmed | Manufactured composite molded to look like slate |
| Weight | 1,000 to 2,000 lb per roofing square (Fixr) | Much lighter; check the product data sheet |
| Published installed cost | $15 to $30 per sq ft (Fixr) | $9 to $15 per sq ft (Fixr) |
| Published life expectancy | 60 to 150 years (InterNACHI) | 10 to 35 years (InterNACHI) |
| Structure | Framing must be designed or verified for the load | Usually suits framing built for shingles; confirm |
| Installer skill | Slate-specific trade | Closer to shingle work, per manufacturer instructions |
Fixr's guide, updated in January 2026, splits natural slate further: softer slate at $15 to $20 per square foot installed and hard slate at $20 to $30. The National Park Service's Preservation Brief 29, the federal guidance on slate roofs for historic buildings, makes a point worth weighing: synthetic slate costs less per piece, but because labor, flashings and tear-off are the same either way, the total first cost can be closer than people expect, and several synthetic roofs may be installed over the life of one natural slate roof.
Synthetic slate has honest advantages in DFW. It needs no structural upgrade on most houses, and some products carry impact ratings relevant to hail. If the look is what you want and the house was framed for shingles, it deserves a fair hearing. Our guide to tile and slate roofs in Dallas compares these materials with clay and concrete tile.
Can your house carry a slate roof?
This is an engineering question, and a roofer's opinion is not the answer to it. At the weights Fixr publishes, a natural slate roof puts many tons on the framing, far more than the asphalt shingles most DFW houses were built to hold.
If the house has slate now, the framing has a track record, though an older structure still deserves a look for sagging rafters, past repairs and rot at the eaves. If you are converting from shingles, hire a licensed structural engineer before anything else. The engineer reviews rafters or trusses, spans, connections and decking, and tells you in writing whether the roof can take the load and what reinforcement would be required. Fixr lists structural reinforcement for slate at $1,000 to $10,000, a range that shows how much the answer varies by house.
North Texas adds its own factor. Expansive clay soil moves foundations with the seasons, and a rigid stone roof tolerates movement less well than shingles. Mention any cracked brick, sticking doors or past foundation work to the engineer.
What separates a slate installation from a shingle job?
The details that decide whether slate lasts are mostly invisible from the street. Preservation Brief 29 lays out the essentials, and they make a good checklist for reading a slate estimate.
- Slope. The brief gives 4 inches of rise per 12 inches of run as the minimum slope for a slate roof. Lower sections need a different material.
- Headlap. Each slate must overlap the course two rows below it. The brief describes a standard headlap of 3 inches, more on lower pitches. Too little headlap lets wind-driven rain past the stone.
- Nails. The brief says non-ferrous slater's nails, such as solid copper or stainless steel, should always be used, because plain steel and galvanized nails usually rust out long before the slate wears. Nails are set so the slate hangs on the shank; one driven too far cracks the stone.
- Flashing metal. Valleys, chimneys and walls are flashed in metal meant to match the life of the slate. The brief recommends 16-ounce copper as the minimum weight for flashings, with heavier copper in valleys and hard-to-reach areas.
- Deck and underlayment. Slate goes over solid sheathing in good condition, with underlayment beneath to cushion the stone and keep out wind-driven rain.
- No sealant fixes. The brief is blunt that roofing mastic or sealant on damaged slate is not a viable repair.
An estimate that names the slate source and grade, the nail type, the flashing metal and its weight, and the headlap tells you the roofer knows the trade. One that says "install slate roof" does not. For the hidden layers on any roof, see underlayment, ventilation and decking.
How do you vet a roofer's slate experience?
Work through these in order, and get the answers in writing:
- Ask for slate projects by address. Photos are a start. Addresses let you drive by, and a past client's phone number lets you ask how the roof has performed.
- Ask who lays the slate. The company's name matters less than the hands on the roof. Will the people who did those past jobs be on yours?
- Ask where the slate comes from. Quarry or producer, grade and expected service life. Preservation Brief 29 reports roughly 125 years for Vermont and New York slates, 175 years or more for Buckingham, Virginia slate, and upward of 60 for Pennsylvania soft-vein slate, so the source is not a small detail.
- Read the fastener and flashing lines. Copper or stainless nails, and copper flashing with a stated weight.
- Ask how they move on the roof. The brief advises keeping foot traffic off slate and working from ladders hooked over the ridge. A roofer who plans to walk the slate freely has answered your question.
- Ask who verifies the structure. The right answer involves an engineer.
- Check the company itself. Local address, insurance certificate, memberships you can look up. Our guide to choosing a roofer in DFW covers those checks.
- Get the workmanship warranty in writing and read what it covers.
When I look at a slate roof, I spend as much time on the valleys and chimney flashing as on the stone. The slate usually has more life left than the metal around it.
What does a slate roof cost in DFW?
No national guide can price a specific house, and slate estimates swing more than any other roof type. For scale, Fixr puts a typical natural slate project between $20,000 and $60,000, with a national average of $40,000, and says labor makes up 40% to 60% of the total. These are published national ranges, not Verde's prices.
The things that move a slate price:
- Roof area and, even more, complexity: every hip, valley, dormer and turret means cutting stone and forming metal.
- Slate type, thickness and source.
- Copper flashing, gutters and trim.
- Structural work found by the engineer.
- Tear-off of the existing roof and any decking replacement.
- Height, pitch and access for staging heavy material.
Compare bids only when they specify the same slate, the same metals and the same scope. How to read a roofing estimate explains the line items.
Do you need a new slate roof, or a repair?
Often a repair. Slate roofs fail in pieces: a few cracked slates from a fallen limb or a careless footstep, a slipped slate where a nail rusted, a leaking valley. Those are repairable by someone who knows how to pull and replace individual slates. Fixr lists typical slate repairs at $300 to $1,600.
Preservation Brief 29 offers a useful threshold. If 20% or more of the slates on a roof or a slope are broken, cracked, missing or sliding out of place, replacement is usually less expensive than repairing them one at a time, especially on a roof near the end of its service life. Below that, and with sound slate, repair is the better use of money. It also notes that sometimes only one slope needs replacing.
Hail complicates this in North Texas. Large stones can crack slate, and the damage is hard to see from the ground. After a storm, have the roof inspected without walking it where possible, and photograph the soft metal first; signs of hail damage on a roof explains why. If you file a claim, remember that a policy pays to restore what you had, and the claim is yours to make.
And if what you want is a long-lived roof rather than stone specifically, a metal roof or an impact-rated shingle may get you there for less weight and money.
How does Verde approach a slate project?
Owner Chris Grimes inspects the roof with you and photographs what he finds, including the flashing, valleys and attic where he can reach it. He explains whether the roof needs repair or replacement before anyone prices a new one. If replacement makes sense, you get a free written estimate.
Verde's published scope lists slate and tile among the roofs it replaces on homes built for the weight. Ask Chris directly about past slate work and for photos of it, exactly as you would with any other roofer, and ask for the manufacturer and workmanship warranties in writing. Verde is an NTRCA Accredited Member and an RCAT member, was voted Best Roofer in the Dallas Observer's Best of Dallas readers' choice in 2021, 2022 and 2023, and holds a 5.0 rating from 54 Google reviews. You can read more about the company.
Talk through your slate roof
Call or text (214) 687-1951, 24/7, or book a free roof inspection. Chris will look at the roof with you, show you the photos and tell you plainly whether slate, a repair or a lighter alternative fits the house.
Questions people ask next
Can a regular shingle crew install a slate roof?
Not without slate-specific training. Slate is cut, punched and hung piece by piece, with nails set so each slate hangs rather than being pinned tight, and the flashing work is done in sheet metal meant to last as long as the stone. A crew that has only laid asphalt shingles will be learning on your house. Ask who on the crew has laid slate before.
How long does it take to install a slate roof?
Longer than a shingle roof, and no honest roofer can give a number before seeing the house. The time depends on roof size and shape, how many valleys, dormers and chimneys need metalwork, whether framing must be reinforced first, and how long the slate takes to arrive from the quarry or supplier. Ask for a written schedule with the estimate.
Will my homeowners insurance cover a slate roof in Texas?
Coverage depends on the insurer and the policy. A slate roof costs more to replace, which affects the dwelling coverage you need, and some policies limit or exclude cosmetic damage or pay roofs on an actual cash value basis. Before you install slate, ask your agent to quote the home with that roof and to explain how hail damage to slate would be settled.
Can solar panels go on a slate roof?
It is possible but demanding. Every mount is a penetration through brittle stone, installers must move across a roof that should not be walked on, and later slate repairs under the array are harder. If solar is in your plans, raise it before the roof is designed so mounting and flashing can be planned, or consider placing panels on a different roof plane.
Where does roofing slate come from, and does the source matter?
It matters a great deal. The National Park Service notes that slates from different quarry regions have very different service lives, from about 60 years to 175 years or more. Ask the roofer for the quarry or producer, the grade and any test data for the specific slate quoted, not just the color name.
Sources
Keep reading
Related guides
Roofing materialsTile and Slate Roofs in Dallas: Cost, Weight, Repairs and HailTile and slate can be excellent on a high-end Dallas home, but only when the framing can carry the weight, the pitch meets code minimums and…Read the guide
Roofers by cityRoof Replacement in Preston Hollow: Who to Trust With Your RoofVerde Roofing, a locally owned roofer based in Plano, replaces roofs in Preston Hollow and across Dallas, including shingle, metal, tile and slate. Owner Chris Grimes…Read the guide
Roofers by cityTile Roof Repair in Dallas: Who Fixes Clay and Concrete TileVerde Roofing, a locally owned roofer based in Plano, works on tile roofs and repairs leaks, flashing and storm damage across Dallas. Owner Chris Grimes inspects…Read the guide 

