What is included
Chris looks at your current roof and talks through whether metal fits your home and goals.
You see the trade-offs in cost, looks, noise, hail and resale before you decide.
A written scope covering tear-off, decking, underlayment, panels, trim and flashing.
The old roof comes off so the decking can be inspected and repaired where needed.
The layers beneath the metal and the trim at edges, valleys and walls are installed carefully.
Loose fasteners, leaking seams, trim and flashing problems on existing metal roofs are repaired.
Dents and functional damage are photographed, and Chris meets your adjuster on site.
Who a metal roof is for
Metal makes the most sense for homeowners who plan to stay in their house a long time, who like the look of standing seam or metal panels, or who own rural property where metal already fits the setting, such as acreage homes and outbuildings in the outer DFW counties. It is less of a fit if you expect to sell soon, are in a neighborhood where the HOA restricts roof materials, or need the lowest up-front price.
Verde Roofing, based in Plano, installs and repairs metal roofs as part of our residential roofing work. Owner Chris Grimes will give you a straight answer on whether metal is right for your home or whether laminated shingles from Malarkey or Owens Corning are the better buy. Our honest metal roof vs. shingles guide is a good place to start.
Metal vs. shingles at a glance
| Question | Metal | Laminated shingles |
|---|---|---|
| Up-front cost | Higher | Lower |
| Look | Modern, farmhouse, rural | Traditional; many colors |
| Hail | Can dent; check policy for cosmetic exclusions | Can bruise or crack |
| Repairs | Panels and trim specific to the system | Widely available |
| HOA approval | Not always allowed | Usually allowed |
Common types of residential metal roofs
- Standing seam. Long panels joined by raised seams, with fasteners hidden under the seams. Clean modern look; usually the higher-priced option.
- Stone-coated steel. Steel panels coated with granules and shaped to look like shingles, shakes or tile. A choice for owners who want metal without the metal look.
- Exposed-fastener panels. Corrugated or ribbed panels screwed through the face. Common on barns, shops and rural homes; the screws and their washers need checking over time.
Each type has its own trim, flashing details and installation rules, so ask which one an estimate is for when you compare bids.
What moves the price
Metal roof prices depend on the panel type (standing seam, stone-coated steel or exposed-fastener panels), the roof's size, pitch and complexity, the amount of trim and flashing, tear-off and decking repair. Verde's price is always a written estimate after a free inspection. Our guide to metal roof cost in Texas explains published ranges and whether the extra cost pays back, and the roof cost calculator gives a quick ballpark before the inspection.
How the free inspection works
Chris inspects your current roof and decking signs, asks how long you plan to stay and what matters most to you, and explains the options. If metal fits, you get a written estimate listing the panel type, underlayment, trim and scope. If it does not, he will tell you, and you can compare a roof replacement with shingles instead.
Installation
Our estimates are written for a full tear-off. That lets the crew inspect the decking, replace damaged boards, install new underlayment and set trim and flashing properly at eaves, valleys, walls and penetrations. These details decide whether a metal roof stays dry; the panels themselves are only part of the job. Ask any installer for the manufacturer warranty and the workmanship warranty in writing, and read our guide to roof warranties.
Metal roof repair and hail
Existing metal roofs need occasional repair: fasteners that back out as the metal expands and contracts in the Texas heat, sealant at seams and trim, and flashing around vents. Hail can dent panels, and whether that is covered depends on your policy. Some policies exclude cosmetic damage to metal roofs. Our guide to hail dents on a metal roof explains cosmetic versus functional damage.
If storm damage is involved, Verde documents it with photos, meets your adjuster on site to show what we found and writes the repair estimate. You own the claim; we do not negotiate it. See storm and hail damage and insurance claim help.
Insurance and resale
Whether a metal roof changes your premium or your home's value depends on your insurer and your market. Read does a new roof add home value or lower your insurance and ask your agent in writing before you decide.
Where we work
From Plano we install and repair metal roofs in Collin, Dallas, Denton, Tarrant, Rockwall, Ellis, Hunt, Kaufman, Johnson, Parker and Wise counties. See our service areas.
Talk through metal for your home
Call or text (214) 687-1951, 24/7, or book a free inspection. Chris will look at your roof and give you an honest recommendation and a written estimate.


