Shingle Roof Replacement in Arlington at a Reasonable Price

In short
Verde Roofing, a locally owned roofer based in Plano, replaces shingle roofs in Arlington and across Tarrant County. Owner Chris Grimes inspects the roof with you, photographs what he finds and gives a free written, itemized estimate; call or text (214) 687-1951. Verde is an NTRCA Accredited Member and RCAT member. With any roofer, a reasonable price is one where the scope is complete: tear-off, new underlayment, flashing, drip edge and the city permit.
Key takeaways
- A reasonable price is the lowest bid that still includes the full scope, not the lowest number on the table.
- This Old House's 2026 guide says labor is about 60 percent of a roof's cost, so a bid far below the rest usually cut labor, materials or required items.
- The City of Arlington requires a building permit for a re-roof unless the replaced area is 10 percent or less of the roof, and contractors must be registered with the city.
- Arlington's re-roof bulletin says underlayment must be replaced when re-shingling and that flashings and drip edges are required.
- A discount that offsets your insurance deductible is illegal in Texas under Business and Commerce Code §27.02.
"Reasonable" is doing a lot of work in that question. Nobody in Arlington wants to overpay for a shingle roof, and nobody wants the bargain roof that leaks at the first wall flashing two summers later. The trouble is that from the driveway, a fair price and a stripped-down price look the same: one number at the bottom of a page.
The way through is to stop comparing totals and start comparing what each total buys. This guide shows what a shingle roof price is made of, what the City of Arlington requires on a re-roof, where low bids usually save their money, and the honest ways to bring a price down.
Who replaces shingle roofs in Arlington at a reasonable price?
Any established roofer serving Tarrant County can replace a shingle roof in Arlington. Whether the price is reasonable depends less on the company's name than on whether the estimate is complete, itemized and comparable with others.
Verde Roofing is one option. We are a locally owned roofer with a single office in Plano, and Tarrant County is part of our service area. We do not publish prices or claim to be the cheapest; what we offer is a free inspection by the owner, Chris Grimes, and a written, line-by-line estimate you can set beside anyone else's. That is the test to apply to every roofer you call, including us.
The City of Arlington gives its residents similar advice: get written estimates from several contractors covering all work, materials, completion date and total cost.
What is a reasonable price for a shingle roof made of?
Start with published ranges, then look inside them. This Old House's 2026 shingle roof guide puts new asphalt shingle roofing at $3.44 to $12 per square foot, or $6,885 to $23,993 for a 2,000-square-foot home. Fixr's 2026 guide reports a national average replacement near $10,000, with most projects between $7,500 and $14,000. Neither is an Arlington-specific figure, and neither is Verde's pricing.
The width of those ranges is the point. Two honest roofers can be thousands of dollars apart on the same house because of roof size, pitch, layers and shingle line. The more useful breakdown is by where the money goes.
| Part of the price | What it pays for | What happens if it is cut |
|---|---|---|
| Labor | Tear-off, installation, flashing work, cleanup. About 60 percent of total cost per This Old House | Rushed nailing, reused flashing, a thin crew |
| Shingles | The brand and line you chose | A lower line than the one you were shown |
| Tear-off and disposal | Removing old layers and hauling them away. Fixr: about $50 per square on average | A second layer laid over the first |
| Underlayment and accessories | Underlayment, starter strip, ridge cap, drip edge | Old felt left in place; no starter or drip edge |
| Flashing, boots and vents | New metal and pipe boots at every penetration and wall | Old, bent or caulked flashing put back |
| Decking allowance | Replacing rotted sheets. Fixr: $2 to $8 per square foot | No allowance, then a surprise charge mid-job |
| Permit and inspection | City permit and required inspections | Unpermitted work that surfaces when you sell |
| Overhead and insurance | Liability coverage, office, warranty service | No coverage if something goes wrong |
A reasonable price has a believable number in every row. If you want to see how the totals build from roof size, the roof cost calculator shows a published-range estimate, and our DFW roof cost guide covers pitch, layers and material in detail.
What does the City of Arlington require on a re-roof?
Arlington is specific, and its requirements are a ready-made checklist for testing a bid. The city's Planning and Development Services technical bulletin on re-roof permits, dated September 13, 2023, says:
- A building permit is required to replace roof covering materials, except when the replacement area is 10 percent or less of the roof area.
- All contractors must be registered to perform work in the City of Arlington.
- The permit must be issued and posted at the job site before work can start.
- Underlayment must be replaced when re-shingling a roof, and flashings and drip edges are required. The bulletin adds that these code provisions apply even to projects that do not need a permit.
- A new layer of decking may not be installed over an existing layer.
- Sheathing that met code when the house was built and is in good condition does not have to be replaced.
- An ice barrier underlayment is not required under the city's amendments.
The city's contractor tips page says you can look up contractors and their permit history at arlingtonpermits.com, and it cautions against any contractor who asks you to pull the permit yourself as an "owner/builder." It also advises not making the final payment until final inspections are complete.
Rules are updated from time to time, so confirm the current version with the city. Requirements also differ next door: the City of Fort Worth treats shingle-only replacements differently, as explained in our guide to roof replacement in Fort Worth.
Where do unusually cheap bids save their money?
When one bid sits far below the others, the savings came from somewhere. In rough order of how often it happens:
- The measurement. Fewer squares than the roof actually has, corrected later with a change order.
- The permit. Left off, on the theory that nobody checks.
- Underlayment. Shingles laid over old felt.
- Flashing. Step flashing, counterflashing and valley metal reused instead of replaced.
- Starter and ridge. Field shingles cut up in place of manufactured starter strip and ridge cap, which can affect the wind warranty.
- Ventilation. Old vents reinstalled or left unbalanced.
- Decking. No per-sheet price, so the number is whatever is announced once your roof is open.
- Insurance. No liability coverage, which is cheap until something breaks.
- Cleanup. No magnet sweep; nails in the lawn and driveway.
None of these is visible from the street on the day the crew leaves. Most show up as a leak, a failed inspection during a sale, or a warranty claim that goes nowhere. Our guide to reading a roofing estimate line by line shows how each of these items should appear in writing.
What are the legitimate ways to lower the price?
There are real savings available that do not involve a worse roof.
- Confirm you need a full replacement. If the damage is limited to one slope or one detail, a repair may carry the roof for years. See our repair-or-replace guide.
- Pick the shingle line deliberately. A standard laminated architectural shingle costs less than a designer or impact-rated line. Decide which features you would actually use.
- Keep sound decking. Arlington's bulletin confirms good sheathing does not have to be replaced. Ask for photos of any sheet the roofer wants to change.
- Get three itemized bids on the same scope. Competition on identical work is the most reliable price check there is.
- Be flexible on timing. Ask whether the schedule is lighter outside the weeks after a major hailstorm, when every crew in the metroplex is booked.
- Fix access problems yourself. Clear the driveway, move patio furniture and trim branches that block the eaves before the crew arrives.
- Check your insurance first if a storm was involved. Hail or wind damage may be a covered loss; ordinary wear is not, according to the Texas Department of Insurance.
- Compare the cost of money. If you are financing, the interest can outweigh any difference between bids. Our guide to paying for a new roof compares the options.
When I write an estimate, I list the decking price per sheet and the flashing items separately, so an owner comparing bids can see exactly which lines differ.
What is never a legitimate discount?
One offer deserves its own section because it is common after hailstorms and it is against the law. If insurance is paying for the roof, your deductible is yours to pay.
Texas Insurance Code §707.002 requires the insured to pay the deductible on a property claim. Texas Business and Commerce Code §27.02 makes it a Class B misdemeanor for a contractor who is paid from insurance proceeds to pay, waive, absorb or decline to collect the deductible, or to give a rebate or credit that offsets it, without the insurer's consent. The same statute requires a contract of $1,000 or more on an insurance-paid job to carry a boldface notice saying so.
A "free upgrade," a "referral credit" or a "yard sign payment" that happens to equal your deductible is the same thing with a different label. Our guide to roof deductibles under Texas law explains the disguises and the lawful ways to plan for a large deductible.
Before you sign: a short test of any Arlington bid
Run each estimate through these questions. A reasonable bid passes all of them.
- Does it state the roof size in squares, and do the bids roughly agree?
- Is tear-off of all existing layers included?
- Is new underlayment listed by type?
- Are drip edge, starter strip and ridge cap listed?
- Is flashing listed as new, with pipe boots and vents?
- Is there a per-sheet price for decking?
- Does it say who obtains the Arlington permit, and that it will be posted?
- Is the contractor registered with the city?
- Are the manufacturer warranty and the workmanship warranty named in writing?
- Is the payment schedule tied to delivery and completion?
If two bids pass and one is lower, you have found your reasonable price.
How does Verde price a shingle roof in Arlington?
Our price is always a written estimate after a free inspection, never a number over the phone. Chris inspects the roof with you, photographs the shingles, flashing, vents and any signs of decking trouble, and tells you first whether a repair would do.
If a roof replacement is the right call, the estimate shows the squares, tear-off, underlayment, flashing, the shingle line and any code items. We install laminated architectural shingles from Malarkey and Owens Corning. If storm damage is behind the replacement, we document it and meet your adjuster on site; you own the claim and pay your deductible.
Verde is an NTRCA Accredited Member and an RCAT member, was voted Best Roofer in the Dallas Observer's Best of Dallas readers' choice in 2021, 2022 and 2023, and has a 5.0 rating from 54 Google reviews, which you can read on our reviews page.
Put a real number next to your other bids
Call or text (214) 687-1951, 24/7, or book a free roof inspection. You will get photos of what Chris found and a written estimate you can compare line by line.
Questions people ask next
Is the cheapest roofing bid always a bad idea?
No. A low bid is fine when it covers the same work as the others: the same squares, tear-off, underlayment, flashing, drip edge, ventilation, permit and cleanup, with the same shingle line. It becomes a problem when the price is low because items are missing. Ask the low bidder to confirm each line in writing, then compare again.
How much should I pay up front for a roof in Arlington?
There is no Texas rule that sets a deposit for roofing, so it comes down to the contract. The City of Arlington warns residents to watch for contractors who ask for cash only or large upfront payments, and advises holding final payment until inspections are complete. A schedule tied to material delivery and completion protects both sides.
Are 3-tab shingles a good way to save money?
They cost less than laminated architectural shingles; This Old House calls three-tab shingles the cheapest asphalt option. They are also a thinner, single-layer product. Before choosing them, compare the wind rating and warranty on the manufacturer's own specification sheet, and ask your HOA and your insurer whether they have any requirement that affects the choice.
Do impact-resistant shingles save money in the long run?
They cost more to install, and whether they pay back depends on your insurer and on how much hail your roof sees. The Texas Department of Insurance notes that roofing materials less likely to be damaged by hail may earn an insurance discount. Ask your agent for the exact discount in writing before you pay for the upgrade.
Can I buy the shingles myself to lower the price?
You can ask, but it rarely helps. Roofers typically buy at contractor pricing and return unused bundles, and when the owner supplies materials, shortages, damaged bundles and delivery timing become the owner's problem. It can also complicate the workmanship warranty. A better use of your effort is tightening the scope and comparing three written bids.
Sources
- City of Arlington Planning & Development Services: Technical Bulletin, Re-Roof Permits, Inspections & Common Q & A (September 13, 2023)
- City of Arlington: Tips for Choosing a Contractor in Arlington (June 2025)
- This Old House: Shingle Roof Cost Guide (2026)
- Fixr: How Much Does a Roof Replacement Cost? (2026)
- Texas Business and Commerce Code §27.02
- Texas Department of Insurance: Insurance and your roof
Keep reading
Related guides
Cost & financingHow Much Does a New Roof Cost in Dallas–Fort Worth?Nobody publishes a verified Dallas–Fort Worth average. National cost guides put a full asphalt shingle replacement at roughly $3.75 to $11 per square foot of roof…Read the guide
Cost & financingHow to Pay for a New Roof: Insurance, Savings, Financing and TimingIf a storm damaged your roof, start with your homeowners policy. If insurance won’t cover it, the main options are savings, a Texas home equity loan…Read the guide
Roofers by cityRoof Replacement in Fort Worth: Who to Hire and How to DecideVerde Roofing, a locally owned roofer based in Plano, replaces residential roofs in Fort Worth and across Tarrant County. Owner Chris Grimes inspects the roof with…Read the guide 

