Call or text 24/7 · 24-hour emergency service Plano, TX 5.0 · 54 Google reviews
Verde Roofing & Construction
Roofers by city

Metal Roof Installation in Plano: Who Installs Metal Roofs on Homes

Standing seam metal roof panels installed by Verde Roofing
Standing seam metal roof panels installed by Verde Roofing. Photo: Verde Roofing.

In short

Verde Roofing, a locally owned roofer based in Plano, installs and repairs metal roofs on homes in Plano. Owner Chris Grimes inspects your roof with you, photographs what he finds and gives a free written estimate; call or text (214) 687-1951, 24/7. Verde is an NTRCA Accredited Member. With any metal installer, check which exact system is being quoted and get your HOA's written approval before you sign.

Key takeaways

  • On a Plano house the realistic residential choices are standing seam and stone-coated steel; exposed-fastener panels suit barns and shops more than suburban streets.
  • Fixr's 2026 data puts metal at about $11 per square foot installed on average versus about $4 for asphalt shingles.
  • Texas Property Code §202.011 protects certain hail-resistant shingles that resemble the subdivision's approved shingles, but it does not give a general right to a metal roof, so HOA approval comes first.
  • The Texas Department of Insurance warns that a metal-roof discount may come with an exclusion for cosmetic damage.
  • Trim and flashing at eaves, valleys, walls and penetrations decide whether a metal roof stays dry, more than the panels do.

Most houses in Plano have asphalt shingle roofs, so when you start asking about metal you run into a practical problem: plenty of roofers will say yes, but far fewer install metal on homes regularly. Metal is a different trade skill from shingles. The panels, the trim and the way the roof handles heat movement all work differently.

This guide is for a Plano homeowner who is seriously considering metal. It covers who does this work, which systems suit a suburban house, the HOA question that should be settled first, what published cost guides say, and how to check an installer before you sign.

Who installs metal roofs on homes in Plano?

You will meet three kinds of companies when you ask for metal roof quotes in Collin County:

  • Residential roofers that also install metal. They replace shingle roofs every week and install metal as part of the same business. The advantage is that they can compare metal and shingles on your house without a stake in one answer.
  • Metal-only specialists. They may form panels themselves and often lean toward commercial or rural work.
  • Sales companies that subcontract everything. The person in your living room will not be on your roof, and the installing crew may change from job to job.

None of these is automatically right or wrong. What matters is who is physically installing the roof, how often that crew installs the specific system you are buying, and who you call if a seam or trim piece leaks later.

Texas does not issue a state roofing license, so there is no state credential that tells you a company is qualified in metal. Our guide on whether Texas licenses roofers and what to check instead explains how to verify insurance, registration and references yourself.

Which metal roof system makes sense on a Plano house?

"Metal roof" covers products that look and behave very differently. On a house in a Plano subdivision, the choice usually comes down to two.

SystemHow it looks from the streetFastenersWhere it tends to fit
Standing seamLong vertical panels with raised seams; clean and modernHidden under the seamsContemporary homes, modern farmhouse styles, accent roofs over porches and bays
Stone-coated steelShaped and granule-coated to resemble shingles, shake or tileHidden by overlapping panelsTraditional brick homes where a shingle or tile look is expected
Exposed-fastener panelsRibbed or corrugated sheetsScrews through the face of the panelBarns, shops and rural buildings more than suburban streets

Standing seam is the system most people picture. Because the fasteners are concealed and the panels can move slightly as they heat and cool, it is generally the premium option. Stone-coated steel is the quieter choice visually. From the curb it reads as a dimensional shingle or tile roof, which is why it comes up so often in neighborhoods with design rules.

Exposed-fastener panels cost less, but the screws and their rubber washers sit in the weather and need checking over the years. They are common on outbuildings across the outer counties and uncommon on Plano houses.

Ask every bidder to name the system, the metal, the thickness and the finish in writing. Two "metal roof" quotes that differ by half may not be describing the same product at all.

Will your HOA approve a metal roof in Plano?

Settle this before you spend time on estimates. Many Plano homes sit in subdivisions with deed restrictions and an architectural review committee, and roofing material and color are among the things those committees commonly control. Rules differ from one subdivision to the next, so the only reliable source is your own association's governing documents.

Texas law gives homeowners some protection on roofing, but it is narrower than many people assume. Texas Property Code §202.011 says a property owners' association may not prohibit shingles designed primarily to be wind and hail resistant, to provide better heating and cooling efficiency than customary composite shingles, or to generate solar power. The protection applies only if the shingles, when installed, resemble the shingles used or authorized in the subdivision, are more durable than and of equal or superior quality to those shingles, and match the aesthetics of the surrounding property.

Read that carefully. It is written about shingles that look like what the neighborhood already allows. It does not create a general right to standing seam panels, and whether a particular stone-coated steel product qualifies is a question for your association and, if it matters enough, an attorney.

The practical steps:

  1. Read your deed restrictions and design guidelines for roofing materials and colors.
  2. Ask the roofer for a product sheet, a color sample and photos of the product installed.
  3. Submit a written application to the architectural committee and wait for a written answer.
  4. Sign the roofing contract only after approval, or make the contract conditional on it.

What does a metal roof cost compared with shingles?

Published national guides are the honest way to frame this, because nobody can price your roof without seeing it.

Fixr's cost guide, updated in January 2026, puts metal roofing at about $11 per square foot installed on average, compared with about $4 for asphalt shingles. It reports that most homeowners pay between $14,400 and $38,400 for a 2,400-square-foot steel roof. For standing seam specifically, Fixr lists $7 to $30 per square foot, and This Old House, in a guide updated in March 2026, lists $8 to $39 per square foot depending on the metal and other choices.

Those ranges are wide for real reasons:

  • Roof shape. Plano's two-story homes with hips, valleys and dormers need far more cut panels and trim than a simple gable.
  • The metal and its thickness. Steel is the common residential choice; aluminum, zinc and copper cost more.
  • Finish. Paint systems vary in how well they hold color under Texas sun.
  • Tear-off and decking. Removing the old roof and replacing damaged decking is part of a proper job.
  • Trim and flashing. Every wall, chimney, skylight and pipe needs its own detail.

These are published ranges, not Verde's prices. Verde's price is always a written estimate after a free inspection. For a deeper look at the numbers and whether the premium pays back, read metal roof cost in Texas, and use the roof cost calculator for a shingle baseline to compare against.

On lifespan, This Old House says standing seam roofs last 50 to 80 years and Fixr gives an average of 50 to 70 years for metal roofs. Treat those as what the material can do when it is installed and maintained well, not as a promise for any one roof.

What does a proper metal roof installation involve?

The sequence below is what a careful residential installation looks like. Use it to follow along with any estimate.

  1. Inspection and measurement. The roof is measured and the existing decking, ventilation and flashing are assessed.
  2. Tear-off. Old shingles and underlayment come off so the decking can be seen. Installing over old shingles hides problems and is worth questioning.
  3. Decking repair. Soft, rotted or delaminated boards are replaced so fasteners have something solid to hold.
  4. Underlayment. A new underlayment suited to the heat under metal goes down over the whole deck.
  5. Edge metal and flashing. Eave and rake trim, valley metal and wall flashing are set before the panels.
  6. Panels. Panels are laid out square to the eave and fastened according to the manufacturer's instructions, with allowance for thermal movement.
  7. Penetrations and ridge. Pipes, vents and skylights get boots and flashing made for metal, and the ridge is capped and vented.
  8. Cleanup and walk-through. Metal shavings are removed, since they rust and stain panels, and the finished roof is checked with you.

The panels are the visible part. The trim and flashing are where leaks start, and they are the best place to judge workmanship. Our guide to underlayment, ventilation and decking explains the layers underneath.

When I look at a metal roof someone else installed, I go to the valleys and the wall flashing first. If those are clean and tight, the rest usually is too.

How do hail and insurance change the decision in Collin County?

North Texas gets hail, and that shapes a metal purchase in two ways.

First, metal can dent. The Texas Department of Insurance notes that hail, flying debris and falling branches can still dent or scratch a metal roof, and that durability varies by metal type, panel thickness and coating. Dents may not affect how the roof sheds water, but you will see them.

Second, your policy may treat those dents differently from shingle damage. TDI says a metal roof could lower your premium, though not all insurers offer discounts and savings vary. It also warns that a discount may come with an exclusion for cosmetic damage, meaning a roof that looks damaged but still works might not be repaired under the policy, and that insurers can add exclusions at renewal.

Before you sign, ask your agent in writing whether your policy has a cosmetic damage exclusion for metal, what discount applies to the specific product, and whether either changes at renewal. Our guide to hail dents on a metal roof explains cosmetic versus functional damage.

When is a metal roof the wrong choice?

Metal is not the answer for every house, and a good installer will say so.

  • You expect to sell within a few years. The higher up-front cost has less time to earn its keep. See metal roof vs. shingles in North Texas for the trade-offs.
  • Your HOA will not approve it. No roof is worth a dispute with your association.
  • Your budget is tight. A well-installed impact-rated shingle roof is a strong option for less money; read the best shingles for Texas hail.
  • Your current roof only needs a repair. A leak at a pipe boot or a few wind-damaged shingles is not a reason to replace the roof with anything.
  • Small dents would bother you. If your policy excludes cosmetic damage, you may live with hail marks for a long time.

How does Verde approach a metal roof in Plano?

Verde Roofing is locally owned and based in Plano, at 5055 W Park Blvd, and installs and repairs residential metal roofs here and across eleven North Texas counties. Its metal roofing work covers standing seam and stone-coated steel.

Owner Chris Grimes inspects your current roof with you, photographs what he finds, asks how long you plan to stay and what matters most to you, and explains honestly how metal compares with laminated shingles from Malarkey or Owens Corning for your house. If metal fits, you get a free written estimate listing the panel type, underlayment, trim and scope, written for a full tear-off so the decking can be inspected. If it does not fit, he will tell you.

Verde is an NTRCA Accredited Member and an RCAT member, was voted Best Roofer by Dallas Observer readers in 2021, 2022 and 2023, and holds a 5.0 rating from 54 Google reviews. Ask Verde, and any installer, for the manufacturer warranty and the workmanship warranty in writing before you decide. If you live farther west in Denton County, our guide to metal roof installation in Flower Mound covers the same decision there.

Talk through metal for your Plano home

Call or text (214) 687-1951, 24/7, or book a free roof inspection. Chris will look at your roof with you and give you a straight recommendation and a written estimate.

Questions people ask next

How long does it take to install a metal roof on a house?

It depends on the system, the size and shape of the roof, how much decking needs repair and the weather, and metal generally takes longer than a shingle roof of the same size. Some panels are ordered or formed for your house, which adds lead time before work starts. Ask each installer for a written schedule covering material lead time, tear-off and installation days.

Will a metal roof make my Plano house hotter or cooler?

Roof color and finish matter more than the word metal. Light, reflective finishes send back more sunlight than dark ones, and attic insulation and ventilation do a large share of the work in a Texas summer. Ask for the reflectance rating of the specific color you are considering, and have the attic ventilation checked during the inspection rather than assuming the roof alone will change your bills.

Can I walk on a metal roof to clean gutters or hang lights?

Many metal roofs can be walked on with care, but where and how depends on the panel profile and the manufacturer's instructions. Stepping in the wrong spot can dent a panel or crack the coating on stone-coated steel. Ask the installer to show you where it is safe to step, and consider working from a ladder at the eave instead.

Does a metal roof interfere with cell service or Wi-Fi?

Most homeowners notice no change, because signals mainly reach a house through walls and windows and Wi-Fi is generated inside. If your cell signal is already weak indoors, any roof change could make a marginal signal slightly worse. Wi-Fi calling, which most carriers and phones support, is the usual fix and does not depend on the roof.

Can solar panels go on a metal roof?

Yes. Standing seam roofs are often considered well suited to solar because many mounting systems clamp to the raised seams instead of drilling through the panels. Stone-coated steel needs mounts designed for that profile. If solar is in your plans, tell the roofer before the metal is ordered so the layout, attachment method and warranties can be planned together.

Sources

  1. Fixr: How Much Does a Metal Roof Cost? (updated January 2026)
  2. This Old House: Standing Seam Metal Roof Cost (updated March 2026)
  3. Texas Department of Insurance: Metal roofs and home insurance, 4 key facts for homeowners
  4. Texas Property Code §202.011: Regulation of certain roofing materials
About the author

Chris Grimes owns Verde Roofing in Plano, Texas, a locally owned residential and commercial roofer serving Dallas–Fort Worth. Verde is an NTRCA Accredited Member, an RCAT member and a Dallas Observer Best of Dallas Best Roofer winner (readers’ choice) in 2021, 2022 and 2023.

Related serviceMetal Roofing in Plano & DFW
CallText